Epic MTB Forum Archive
Read-only archive of forum.epicmtb.com — no new posts or replies possible.

Dual air setup tips?

10 Jul 2011, 15:14
Does anyone have any tips for setting up a dual air fork?
Its my first dual air so im a little lost.
Ive looked on the sram website but didnt come across anything.
Its a Reba TK fork.
10 Jul 2011, 18:35
Have a look at the back of the left stanchion for the recommended air pressure for the upper and lower air chamber for your weight.

Set the rebound to the speed that suits.

Use that as a starting point and then adjust the air up or down depending on if you like your forks harder or sofer.
10 Jul 2011, 19:05
Originally posted by Oninio View Post
Have a look at the back of the left stanchion for the recommended air pressure for the upper and lower air chamber for your weight.

Set the rebound to the speed that suits.

Use that as a starting point and then adjust the air up or down depending on if you like your forks harder or sofer.
Cheers,

I came across this from SRAM.
I just didnt know what the story was with the negative air chamber.
10 Jul 2011, 20:43
Set both pressures the same according to your weight and see if the sag is correct (around 20%) then decrease negative if you want your fork feel stiffer or increase if you like it plusher and more compliant (small bumps). Just bear in mind that if when negative > positive you will loose travel as the negative pressure will pull it down.
11 Jul 2011, 01:58
Originally posted by Max Power View Post
Set both pressures the same according to your weight and see if the sag is correct (around 20%) then decrease negative if you want your fork feel stiffer or increase if you like it plusher and more compliant (small bumps). Just bear in mind that if when negative > positive you will loose travel as the negative pressure will pull it down.
Cheers dude.