Replaced these with a ligher UST pair last year and thought I'd hang on to these as a spare set but they are just taking up space and gathering dust!
So, the decals have been removed from the Rims, and there is a crack on one of the rotor bolt holes on the rear hub. I over torqued it one day while fitting new rotors, tbh it was more of an issue with too much threadlock! It can be seen in one of the pics. It's never been a problem and I have swapped rotors again since and once it's not overtight I dont see it being an issue. To compensate they have new 185mm G3's, a low mileage SLX 9spd 11-32 Cassette and some reasonable Maxxi Advantage 2.1's. The front has standard skewer adapters while the rear is 10mm/ 135mm Bolt through (these are obviously convertable to most current fork/ frame options). They dont come with skewer or bolt through axle..
Looking for â¬250..
So, the decals have been removed from the Rims, and there is a crack on one of the rotor bolt holes on the rear hub. I over torqued it one day while fitting new rotors, tbh it was more of an issue with too much threadlock! It can be seen in one of the pics. It's never been a problem and I have swapped rotors again since and once it's not overtight I dont see it being an issue. To compensate they have new 185mm G3's, a low mileage SLX 9spd 11-32 Cassette and some reasonable Maxxi Advantage 2.1's. The front has standard skewer adapters while the rear is 10mm/ 135mm Bolt through (these are obviously convertable to most current fork/ frame options). They dont come with skewer or bolt through axle..
Looking for â¬250..